Aluminum Handle for Sguee
60,65 A squeegees are very soft; they are usually used to print on
ceramic and with glitter inks.
70,75 A squeegees are recommended for printing on glass and on
80,85 A squeegees are used to print with high-speed automatic
machines, to print on CDs, credit cards, electronic circuits, small
objects, where high precision is required.
SURFACE: if the item you have to print has an rough, non-planar
surface, the most suitable squeegee durometer is between 60 and 70
sh. If the surface is smooth, a harder durometer squeegee, between
80 and 90, should be used.
MESH: if a high mesh count (mesh very thin!) is being used, you
need a harder squeegee (80 or 90 sh); if you are printing with
glitter ink (which has large flakes of shiny, plastic material that
have to pass through the mesh) you should use a softer squeegee.
INKS: the more aggressive inks, such as UV inks, cause more damage
to the squeegee than a standard water based ink. The harder the
material, the more solvent resistant the blade. Therefore, to
eliminate swelling and chemical breakdown, use a harder durometer
INK DEPOSIT: a soft squeegee will deposit a thicker layer of ink
than a harder squeegee.
1.screen printing industry.
Use to scrape the screen printing solvent liquid, and make to get
the equisite pattern.
2.Photography printing industry
Used in photography printing to dry the photographic paper after it
is washed,preventing wrinkles or water sports.
3.Window film,Car vinyl film, Ceramic and Sanitaryware design in
Use to scrap the thin film sticked on the window, make film very
Or scrape vinyl film, make to achieve bubble free application.
To crape circuit board.